Raritan Computer DKX2-v2.6.0-0R-E 用户手册
Chapter 8: Device Management
197
3. Enter a Port Group Name. The port group name is not case sensitive
and can contain up to 32 characters.
4. Select the Blade Server Group checkbox.
If you want to designate that these ports are attached to blades
housed in a blade chassis (for example, HP c3000 or Dell
PowerEdge 1855), select the Blade Server Group checkbox.
housed in a blade chassis (for example, HP c3000 or Dell
PowerEdge 1855), select the Blade Server Group checkbox.
Note: This is especially important to CC-SG users who want HP
blades to be organized on a chassis basis, although each blade has
its own connection to a port on the KX II.
blades to be organized on a chassis basis, although each blade has
its own connection to a port on the KX II.
5. Click on a port in the Available box in the Select Ports for Group
section. Click Add to add the port to the group. The port will be
moved to the Selected box.
moved to the Selected box.
6. Click OK to add the port group.
To edit port group information:
1. On the Port Group Management page, click on the link of the port
group you want to edit. The Port Group page opens.
2. Edit the information as needed.
3. Click OK to save the changes.
To delete a port group:
1. Click on the Port Group Management page, select the checkbox of
the port group you want to delete.
2. Click Delete.
3. Click OK on the warning message.