Q-Logic 5800V 用户手册
1–General Description
Serial Port
1-8
59265-02 B
Serial Port
The QLogic 5800V Series switch is equipped with an RS-232 serial port for
maintenance purposes, as shown in
maintenance purposes, as shown in
. You can manage the switch
through the serial port using the CLI.
Figure 1-6. Serial Port and Pin Identification
The serial port requires a null-modem F/F DB9 cable. The pins on the switch
RS-232 connector are shown in
RS-232 connector are shown in
and identified in
. For
information about connecting the management workstation through the serial port,
refer to
refer to
.
Table 1-2. Serial Port Pin Identification
Pin Number
Description
1
Carrier Detect (DCD)
2
Receive Data (RxD)
3
Transmit Data (TxD)
4
Data Terminal Ready (DTR)
5
Signal Ground (GND)
6
Data Set Ready (DSR)
7
Request to Send (RTS)
8
Clear to Send (CTS)
9
Ring Indicator (RI)
1
5
6
9
RS-232 Connector
Pin Identification
Pin Identification
Serial Port