Raritan Engineering KX2-864 用户手册

Chapter 7: Device Management 
 

The Generic Blade Chassis' selection provides only a manual 
configuration mode of operation. See 

 (on page 160), 

 (on page 

161), and 

 (on page 163) for important, additional information when 

configuring the blade chassis. 

1.  Connect the blade chassis to the Dominion KX II. See 

 (on page 25) for details. 

2.  Select Device Settings > Port Configuration to open the Port 

Configuration page.   

3.  On the Port Configuration page, click on the name of the blade 

chassis you want to configure. The Port page will open. 

4.  Select the Blade Chassis radio button. The page will then display the 

necessary fields to configure a blade chassis. 

5.  Select Generic from the Blade Server Chassis Model drop-down. 

6.  Configure the blade chassis as applicable. 

a.  Switch Hot Key Sequence - Define the hot key sequence that will 

be used to switch from KVM to the blade chassis. The Switch 
Hot Key Sequence must match the sequence used by the KVM 
module in the blade chassis. 

b.  Administrative Module Primary IP Address/Host Name - Not 

applicable. 

c.  Maximum Number of Slots - Enter the default maximum number 

of slots available on the blade chassis. 

d.  Port Number - The default port number for the blade chassis is 

22.  Not applicable. 

e.  Username - Not applicable. 

f. 

Password - Not applicable. 

7.  Change the blade chassis name if needed.   

8.  Indicate the blades that are installed in the blade chassis by 

checking the Installed checkbox next to each slot that has a blade 
installed. Alternatively, use the Select All checkbox. If needed, 
change the blade server names.   

9.  In the Blade Chassis Managed Links section of the page, you are 

able to configure the connection to a blade chassis web browser 
interface if one is available. Click the Blade Chassis Managed Links 

icon 

  to expand the section on the 

page.