Raritan Engineering KX2-864 用户手册

Chapter 7: Device Management 
 

The Dominion KX II supports the aggregation of ports connected to 
certain types of blades into a group representing the blade chassis. 
Specifically, HP BladeServer blades and Dell PowerEdge 1855/1955 
blades when the DellPowerEdge 1855/1955 is connected from each 
individual blade to a port on the Dominion KX II.   

The chassis is identified by a Port Group Name and the group is 
designated as a Blade Server Group on the Port Group Management 
page. Port Groups consist solely of ports configured as standard KVM 
ports, not ports configured as blade chassis. A port may only be a 
member of a single group. 

Ports connected to integrated KVM modules in a blade chassis are 
configured as blade chassis subtypes. These ports are eligible to be 
included in port groups. 

When Dominion KX II ports are connected to integrated KVM modules in 
a blade chassis and not to individual blades, the ports are configured as 
blade chassis subtypes.    These ports are not eligible to be included in 
port groups and will not appear in the Select Port for Group, Available 
list. 

If a standard KVM port has been included in a port group, and then is 
subsequently repurposed for use as a blade chassis subtype, it must first 
be removed from the port group.   

Port Groups are restored using the Backup and Restore option (see 

 (on page 193)). 

 

 

1.  Click Device Settings > Port Group Management to open the Port 

Group Management page. 

2.  Click the Add button to open the Port Group page.