Raritan Engineering KX2-864 用户手册

Chapter 2: Installation and Configuration 
 

The Dominion KX II operates in several mouse modes: 

• 

Absolute Mouse Mode

™

 (D2CIM-VUSB only) 

• 

Intelligent Mouse Mode (do not use an animated mouse) 

• 

Standard Mouse Mode 

Mouse parameters do not have to be altered for Absolute Mouse 
Synchronization but D2CIM-VUSB or D2CIM-DVUSB is required for this 
mode. For both the Standard and Intelligent mouse modes, mouse 
parameters must be set to specific values, which are described here. 
Mouse configurations will vary on different target operating systems. 
Consult your OS documentation for additional detail. 

Intelligent mouse mode generally works well on most Windows 
platforms. Intelligent mouse mode may produce unpredictable results 
when active desktop is set on the target. For additional information on 
Intelligent mouse mode settings, see 

 (on page 

Servers with internal KVM switches inside the blade chassis typically do 
not support absolute mouse technology. 

 

 

1.  Configure the mouse settings: 

a.  Choose Start > Control Panel > Mouse. 

b.  Click the Motion tab. 

ƒ  Set the acceleration to None. 

ƒ  Set the mouse motion speed setting to exactly the middle 

speed. 

ƒ Click 

OK. 

2.  Disable transition effects: 

a.  Select the Display option from the Control Panel. 

b.  Click the Effects tab. 

ƒ  Deselect the "Use the following transition effect for menus 

and tooltips" option. 

ƒ  Click OK and close the Control Panel.