National Instruments NI 6120 用户手册

© National Instruments Corporation

•

DAQ hardware documentation—This documentation has detailed 
information about the DAQ hardware that plugs into or is connected to 
the computer. Use this documentation for hardware installation and 
configuration instructions, specification information about the DAQ 
hardware, and application hints.

•

Software documentation—You may have both application software 
and NI-DAQ documentation. NI application software includes 
LabVIEW and Measurement Studio. After you set up the hardware 
system, use either your application software documentation or the 
NI-DAQ documentation to help you write your application. If you 
have a large, complicated system, it is worthwhile to look through the 
software documentation before you configure the hardware.

•

Accessory installation guides or manuals—If you are using accessory 
products, read the terminal block and cable assembly installation 
guides. They explain how to physically connect the relevant pieces 
of the system. Consult these guides when you are making the 
connections.

The following documents contain information you may find helpful:

•

DAQ Quick Start Guide, located at 

ni.com/manuals

•

DAQ-STC Technical Reference Manual, located at 

ni.com/manuals

•

NI Developer Zone tutorial, Field Wiring and Noise Considerations 
for Analog Signals, located at 

ni.com/zone

•

NI-DAQ User Manual for PC Compatibles, located at 

ni.com/manuals

•

NI-DAQ Function Reference Help. You can access this help file by 
clicking Start»Programs»National Instruments»NI-DAQ»
NI-DAQ Help.

PXI Specification Revision 2.0, available from 

www.pxisa.org