National Instruments 1128 用户手册
Chapter 1
Installing and Configuring the SCXI-1127/1128
1-4
ni.com
Installing the SCXI-1127/1128 Module into the SCXI Chassis
You need the following items to complete the installation:
•
SCXI-1127/1128
•
SCXI chassis
•
1/8 in. flathead screwdriver
Figure 1-1. Installing the SCXI-1127/1128 into an SCXI Chassis
Follow these steps to install your SCXI-1127/1128 module into the SCXI
chassis while referring to Figure 1-1.
chassis while referring to Figure 1-1.
1.
Turn off the computer that contains the DAQ/DMM device or
disconnect it from your SCXI chassis.
disconnect it from your SCXI chassis.
2.
Turn off the SCXI chassis. Do not insert the SCXI-1127/1128 module
into a chassis that is turned on.
into a chassis that is turned on.
3.
Insert the SCXI-1127/1128 module into the rightmost slot. Gently
guide the module into the module guides and push it to the back of the
slot until the connectors make good contact. The module must be
firmly engaged; however do not force the module into place.
guide the module into the module guides and push it to the back of the
slot until the connectors make good contact. The module must be
firmly engaged; however do not force the module into place.
1
AB0+
2
AB0–
3
NI 4060 for PCI
4
AB2+
5
AB2–
6
HV8-BAN4
7
SH9MD-9MD
8
2-Slot HVAB-Backplane Adapter
9
SCXI Chassis
10 SCXI-1127/1128 Module
8
2
3
4
5
6
7
9
10
1