National Instruments PC-DIO-96 用户手册
Specifications
Appendix A
PC-DIO-96 User Manual
A-2
© National Instruments Corporation
Pins 1–48, 51–98 ......................................................
Level
Min
Max
Output high voltage
(I out = -2.5 mA)
3.7 V
5.0 V
Output low voltage
(I out = 2.5 mA)
0.0 V
0.4 V
Output current
(V
OL
= 0.5 V)
4 mA
—
Output current
(V
OH
= 2.7 V)
4 mA
—
Environment
Operating Temperature ................................................
0
°
to 70
°
C
Storage Temperature ....................................................
-55
°
to 150
°
C
Relative humidity .........................................................
5% to 90% noncondensing
Physical
Dimensions ..................................................................
3.9 in. by 6.5 in.
I/O connector................................................................
100-pin male, ribbon-cable connector
Power Requirement (from PC I/O Channel)
Typ power ....................................................................
0.38 A at 5 VDC (
±
5%)
Max power ...................................................................
0.8 A at 5 VDC (
±
5%)
Note:
These power usage figures do not include the power used by external devices that are connected to the
fused supply present on the I/O connector.
fused supply present on the I/O connector.
Transfer Rates
The maximum average transfer rates for the PC-DIO-96 are shown as follows. The code used to make the
measurements follows the table. The assembly language code was assembled as inline assembly C code using
version 8.00 of the Microsoft Optimizing C Compiler. The C code was compiled using version 8.00 of the
Microsoft Optimizing C Compiler.
measurements follows the table. The assembly language code was assembled as inline assembly C code using
version 8.00 of the Microsoft Optimizing C Compiler. The C code was compiled using version 8.00 of the
Microsoft Optimizing C Compiler.