Fujitsu eLux NG S26361-F2600-L134 用户手册

 

 

 

 

 

 

Build # 27

  

64

 

The Thin Client uses the standardized Line Printer Daemon Protocol (BSD spool) as defined 
in RFC 1179 to communicate with network printers. 

Figure 40: Printer definition dialog box (settings for network printer shown) 

From the Setup tab, click the Printer subtab. 

1. Click 

. 

2.  Enter the name of the printer in the Printer settings dialog box. 
3. From 

the 

 drop-down list, select Network. 

4. From 

the 

 drop-down list, select None to disable filtering. Select Text to print 

from a local shell (print shell command: lpr -P<printer name>). Select PCL2 for the 
PCL2 protocol (not supported by all hardware platforms). 

5.  Enter the IP address or name of the remote system or printer box in the Printer 

 field. 

•  If your network does not have a DNS server, alternatively you can use the name 

of the printer if it has been defined in the local hosts file on the Thin Client (Setup 
> Network > Advanced) See Ch. 3.2 Network. 

6.  Enter the name of the printer queue of the remote system or printer box in the Printer 

 field. 

7.  Citrix MetaFrame ICA servers can automatically create a printer definition 

(“autocreated printer”) using parameters you entered on the Thin Client. These 
parameters are transferred to the MetaFrame server when you connect via ICA. Enter 
the following: 
 
Driver name

: Enter the driver for your printer. Note: The printer driver name must be 

exactly the same as the driver installed on the MetaFrame server. See the installed 
printer driver list on the MetaFrame server if you are unsure. The MetaFrame server 
will not autocreate a printer if the printer driver you entered here is not installed on the 
MetaFrame server (check capitalization and spelling!). 
  
Default

: Sets the printer to your default printer on the MetaFrame server. 

8. Click 

 in the Printer definition dialog box and Apply in the Printer subtab. 

Name of printer queue of the 
remote system or printer box

IP address or name of the 
remote system or printer box