Fujitsu eLux NG S26361-F2600-L134 用户手册
产品代码
S26361-F2600-L134
www.
myelux
.com
eLux
®
NG
Build # 27
71
3.12.1.3 USB mass storage devices
In general, all USB mass storage devices are supported including, but not limited to, CD-ROM,
floppy, USB stick, 2.0 flash card readers, photo mass storage, etc. A maximum of eight mass
storage devices can be used at one time.
For security reasons, by default the port is disabled.
To enable the USB ports for mass storage devices,
select the check box USB mass storage devices in the Hardware tab.
Click on the browse button to display currently connected devices.
Accessing USB storage devices is described in section “3.9 Drives.”
floppy, USB stick, 2.0 flash card readers, photo mass storage, etc. A maximum of eight mass
storage devices can be used at one time.
For security reasons, by default the port is disabled.
To enable the USB ports for mass storage devices,
select the check box USB mass storage devices in the Hardware tab.
Click on the browse button to display currently connected devices.
Accessing USB storage devices is described in section “3.9 Drives.”
3.12.1.4 USB mouse / keyboard
A USB keyboard / mouse can be used without further configuration (plug-and-play). For a list
of supported keyboards, see “Appendix 6: Supported Hardware.”
of supported keyboards, see “Appendix 6: Supported Hardware.”
3.12.2 RAM Disk
A large RAM disk is required in special instances, such as printing a large file from Acrobat
Reader. You can set the size in a defined area depending on the physical main memory
without restricting the basic functionality of the Thin Client. The option RAM disk only affects
/tmp
Reader. You can set the size in a defined area depending on the physical main memory
without restricting the basic functionality of the Thin Client. The option RAM disk only affects
/tmp
on the flash card (and not /setup, for example).
If you have 64 MB or less of main memory, the RAM disk size cannot be changed. It is fixed at
4 MB. However, if your main memory is greater than 64 MB, you can increase the RAM disk
settings. In this case, the minimum RAM disk size is 8 MB.
4 MB. However, if your main memory is greater than 64 MB, you can increase the RAM disk
settings. In this case, the minimum RAM disk size is 8 MB.
To modify RAM settings (> 64 MB)
1. From
the
Setup
tab, click the Hardware
subtab.
2. Move the slider to the right to increase
the disk space allocated to RAM.
3. Click
Accept
.
Data in /tmp is automatically deleted when you turn off or restart the Thin Client
(Applications > Shutdown > Restart or Switch off). It is not deleted when you log off
(Applications > Shutdown > Log off).
(Applications > Shutdown > Restart or Switch off). It is not deleted when you log off
(Applications > Shutdown > Log off).
3.12.3 Multiple Monitors
If you have a video card installed, you can set the
number of monitors to use in the Hardware tab.
You can choose between one, two, three or four
monitors (depending on card type). This option is
displayed only if the corresponding software
(Matrox video card software FPM in base OS,
“matrox”) and hardware (a graphics card) are installed.
For a list of supported cards, see “Appendix 6: Supported Hardware.”
number of monitors to use in the Hardware tab.
You can choose between one, two, three or four
monitors (depending on card type). This option is
displayed only if the corresponding software
(Matrox video card software FPM in base OS,
“matrox”) and hardware (a graphics card) are installed.
For a list of supported cards, see “Appendix 6: Supported Hardware.”
3.12.4 COM Ports
Available with base OS 1.8.
You can set COM port settings in the Hardware tab.
Click on the COM port settings button. The COM port settings dialog box appears. Make
the desired changes.
You can set COM port settings in the Hardware tab.
Click on the COM port settings button. The COM port settings dialog box appears. Make
the desired changes.
Figure 44: RAM disk settings (for > 64 MB main memory)