RuggedCom RS400 用户手册
Network Discovery
RS400
215
ROS™ v3.5
10.2.1 Global LLDP Parameters
Figure 148: Global LLDP Parameters Form
State
Synopsis: { Disabled, Enabled }
Default: Enabled
Enables LLDP protocol. Note that LLDP is enabled on a port when LLDP is enabled globally
and along with enabling per port setting in Port LLDP Parameters menu.
Synopsis: { Disabled, Enabled }
Default: Enabled
Enables LLDP protocol. Note that LLDP is enabled on a port when LLDP is enabled globally
and along with enabling per port setting in Port LLDP Parameters menu.
Tx Interval
Synopsis: 5 to 32768
Default: 30 s
The interval at which LLDP frames are transmitted on behalf of this LLDP agent.
Synopsis: 5 to 32768
Default: 30 s
The interval at which LLDP frames are transmitted on behalf of this LLDP agent.
Tx Hold
Synopsis: 2 to 10
Default: 4
The multiplier of the Tx Interval parameter that determines the actual time-to-live (TTL) value
used in a LLDPDU. The actual TTL value can be expressed by the following formula:
TTL = MIN(65535, (Tx Interval * Tx Hold))
Synopsis: 2 to 10
Default: 4
The multiplier of the Tx Interval parameter that determines the actual time-to-live (TTL) value
used in a LLDPDU. The actual TTL value can be expressed by the following formula:
TTL = MIN(65535, (Tx Interval * Tx Hold))
Reinit Delay
Synopsis: 1 to 10
Default: 2 s
The delay in seconds from when the value of Admin Status parameter of a particular port
becomes 'Disabled' until re-initialization will be attempted.
Synopsis: 1 to 10
Default: 2 s
The delay in seconds from when the value of Admin Status parameter of a particular port
becomes 'Disabled' until re-initialization will be attempted.
Tx Delay
Synopsis: 1 to 8192
Default: 2 s
The delay in seconds between successive LLDP frame transmissions initiated by value or status
Synopsis: 1 to 8192
Default: 2 s
The delay in seconds between successive LLDP frame transmissions initiated by value or status