RuggedCom RSG2288 用户手册

Product Overview 

Depending on the order code of the product, the RSG2200 series products can 
be equipped with several different types of fiber optic ports. The Transmit (TX) 
and Receive (RX) connections of each port must be properly connected and 
matched for proper link and operation. Modules populated on the top row of the 
device typically have locking mechanisms or tabs facing the top of the unit. 
Modules located on the bottom row of the device have locking mechanisms or 
tabs facing the bottom of the unit. 

The diagrams in this section depict each fiber connector style supported by the 
RuggedSwitch

®

 in order to provide a reference for the proper orientation of cable 

connections. A front view (looking into the connector) and a top view of the 
connector module are shown for each one. Note that if modules are populated on 
the bottom row of the device, the transceiver orientation will be inverted relative 
to the diagram (i.e. RX and TX will be reversed). 

 

Figure 4 and Figure 5 show front and top views of the pluggable fiber transceiver 
modules supported by RuggedSwitch

®

. Note that when the module is installed in 

the unit, most of the body of the module as shown in top views below will not be 
visible.  

 

 

 

 

 

13 

RuggedCom

® 

RuggedSwitch

® 

RSG2288 Installation Guide rev103