3com 5500 用户手册
23
Q
O
S/Q
O
S P
ROFILE
C
ONFIGURATION
G
UIDE
Configuring Traffic
Policing and LR
Policing and LR
Network Diagram
Figure 62 Network diagram for traffic policing and LR configuration
Networking and
Configuration
Requirements
A company uses a switch (a Switch 5500 in this example) to interconnect all the
departments. PC 1 with IP address 192.168.0.1 belongs to the R&D department
and is connected to Ethernet 1/0/1 of the switch; the marketing department is
connected to Ethernet 1/0/2 of the switch.
departments. PC 1 with IP address 192.168.0.1 belongs to the R&D department
and is connected to Ethernet 1/0/1 of the switch; the marketing department is
connected to Ethernet 1/0/2 of the switch.
Configure traffic policing and LR to satisfy the following requirements:
■
Limit the total outbound traffic rate of the marketing department and the R&D
department to 16000 kbps; drop the packets exceeding the rate limit.
department to 16000 kbps; drop the packets exceeding the rate limit.
■
Limit the rate of the IP packets that PC 1 of the R&D department sends out to
8000 kbps; drop the packets exceeding the rate limit.
8000 kbps; drop the packets exceeding the rate limit.
Applicable Products
n
The Switch 4210 does not support traffic policing.
The R&D
department
The Marketing
department
PC 1
192.168.0.1
Switch
To the router
Eth1/0 /1
Eth1/0/2
Product series
Software version Hardware version
Switch 5500
Release V03.02.04
All versions
Switch 5500G
Release V03.02.04
All versions
Switch 4500
Release V03.03.00
All versions
Switch 4210
Release V03.01.00
All versions