3com 9000 SX 用户手册
Factory Defaults
1-9
Factory Defaults
Table 1-3 Switch 9000 Factory Defaults
Item
Default Setting
Port status
Enabled on all ports
Default user account
admin with no password and user with no
password
password
Console port configuration
9600 baud, eight data bits, one stop bit, no
parity, XON/XOFF flow control enabled
parity, XON/XOFF flow control enabled
SNMP read community string
Public
SNMP write community string
Private
RMON history session
Enabled
RMON alarms
Enabled
■
Send trap if load is greater than 75% of
available bandwidth
available bandwidth
■
Send trap if there are more than 10 errors in
1,000 packets
1,000 packets
PACE
Recognition disabled
Virtual LANs
One VLAN named default; all ports belong to the
default VLAN; no protocol filter used.
default VLAN; no protocol filter used.
802.1Q tagging
All packets are untagged on the default VLAN
(default)
(default)
BOOTP
Enabled on the default VLAN (default)
Spanning Tree Protocol
Disabled; one defined as “s0”
IP Routing
Disabled
Forwarding database aging
period
period
30 minutes
Auto-negotiation
On
SW9000.BK Page 9 Wednesday, April 1, 1998 11:00 AM