3com 3CRWX120695A WXR100 用户手册

If power levels for one or more coverage areas could not be optimized, 
show the RF coverage at baseline association and minimum transmit rates 
for the coverage areas by doing the following:

1 In the Show RF coverage using listbox, select how you want to display the 

coverage:

„

Baseline Association Rate—Coverage is shown based on the MAP 
radio baseline association rate. The baseline association rate is the 
typical data rate the radio is expected to support for client 
associations. (The baseline association rate is specified during 
planning, on a coverage area basis.) 

„

Data Rate—Coverage is shown in colored bands that represent each 
of the data transmit rates supported by the radio. These rates are 
standard for each radio type. 

„

RSSI—Coverage is shown based on the received signal strength 
indication (RSSI) of the radio’s signal heard by other radios. 

2 In the Coverage Areas section of the Organizer panel, select the scope for 

which you want to display coverage. You can display coverage for an 
individual radio, a specific coverage area, or all coverage areas on the 
floor. 

„

To select multiple contiguous objects, click Shift while selecting.

„

To select multiple noncontiguous objects, click Ctrl while selecting.

If you need to make adjustments, do the following:

a Manually move the MAPs, or increase the transmit power levels.

b Manually create more MAPs, and place them on the floor.

c Modify the coverage area so that the capacity requirements are 

higher.