3com 3CRWX120695A WXR100 用户手册
244
C
HAPTER
7: C
ONFIGURING
W
IRELESS
P
ARAMETERS
If you have not planned RF coverage or configured any MAPs in the
network plan yet, no radios are listed. You can add the radios later.
(Select the radio profile, click Properties, then select Radio Selection. See
“Configuring Advanced Radio Profile Settings” on page 265.)
network plan yet, no radios are listed. You can add the radios later.
(Select the radio profile, click Properties, then select Radio Selection. See
“Configuring Advanced Radio Profile Settings” on page 265.)
d Go to step 15.
15 Click Finish.
The service profile appears in the service profile table.
Configuring a Voice
over Wireless Service
If the VoIP devices use Wi-Fi Multimedia, you do not need to configure a
service profile. WMM is supported automatically. A voice service profile is
required only for non-WMM devices.
service profile. WMM is supported automatically. A voice service profile is
required only for non-WMM devices.
1 Access the Voice Service Profile wizard:
a In the Organizer panel, click on the plus sign next to the WX switch on
which you want to configure the service profile.
b Click on the plus sign next to Wireless.
c Select Wireless Services.
d In the Task List panel, select Voice Service Profile.
2 Read the description of the wizard on the first page, then click Next.
3 Edit the service name in the Name box.
Editing the name is optional if this is the first service of this type you are
configuring on the switch.
configuring on the switch.
4 Type the SSID name in the SSID box.
5 Select the SSID type from the SSID Type box:
Encrypted—Traffic on the SSID is encrypted.
Clear—Traffic on the SSID is unencrypted.
6 Select the VoIP vendor from the Vendor drop-down list:
SpectraLink—Non-WMM SVP devices
Vocera—Non-WMM Vocera devices
Avaya—Non-WMM Avaya devices
Other—Non-WMM devices that are not SVP or Avaya phones.
7 Click Next.