3com 3CRWX120695A WXR100 用户手册

„

Wireless Switch—Use a wizard to configure basic switch 
parameters. (See “Using the Create Wireless Switch Wizard” on 
page 165.)

„

Third-Party AP—Add a third-party AP for use in network planning. 
(See “Creating a Third-Party AP” on page 63.)

„

Country Code—Change the regulatory domain for the MAPs in 
the network plan. (See “Changing the Country Code” on 
page 65.)

„

Auto-Tune Settings—Update the channel and power information 
in the network plan to match the channel and power settings 
assigned to MAPs in the network by the RF Auto-Tune feature. 
(See “Applying the Network’s RF Auto-Tuning Settings to the 
Network Plan” on page 65.)

„

Upload Wireless Switch—Add a WX switch that is already 
deployed in the live network to the network plan. (See “Uploading 
a WX Switch into the Network Plan” on page 66.)

„

Convert Auto APs—Convert MAPs that were configured by an 
Auto-AP profile into statically configured MAPs. (See “Converting 
Auto DAPs into Statically Configured APs” on page 67.)

„

Network Domain—Configure a group of Mobility Domains into a 
single Network Domain. (See “Creating a WX Switch” on 
page 63.)

After creating a network plan, you can save, close, open, or delete it. You 
can also share a network plan with others.

When you create a network plan and save changes, a directory with the 
same name as the network plan is created in the config-db directory of 
the 3WXM installation directory on the 3WXM Services host. 

Each time you save a configuration change, 3WXM saves the changes to 
the network plan. You do not need to explicitly save the network plan 
itself. However, if the network plan has unsaved changes when you select 
to exit 3WXM or close a network plan, 3WXM displays a prompt to ask 
whether you want to save or discard the changes, or cancel the request. 
(See “Saving or Discarding Configuration Changes” on page 34.)