3com WX1200 用户手册
274
C
HAPTER
10: N
ETWORK
D
OMAIN
C
OMMANDS
clear
network-domain
network-domain
Clears all Network Domain configuration and information from a WX
switch, regardless of whether the WX switch is a seed or a member of a
Network Domain.
switch, regardless of whether the WX switch is a seed or a member of a
Network Domain.
Syntax —
clear network-domain
Defaults — None.
Access — Enabled.
History —Introduced in MSS 4.1.
Examples — This command has no effect if the WX switch is not
configured as part of a Network Domain.
configured as part of a Network Domain.
To clear a Network Domain from a WX switch within the domain, type
the following command:
the following command:
WX1200# clear network-domain
This will clear all network-domain configuration. Would you
like to continue? (y/n) [n] y
success: change accepted.
This will clear all network-domain configuration. Would you
like to continue? (y/n) [n] y
success: change accepted.
See Also
Table 47 Network Domain Commands by Usage (continued)
Type
Command