3com WX1200 用户手册
clear network-domain seed-ip
277
clear
network-domain
seed-ip
network-domain
seed-ip
Removes the specified Network Domain seed from the WX switch’s
configuration. When you enter this command, the Network Domain TCP
connections between the WX switch and the specified Network Domain
seed are closed.
configuration. When you enter this command, the Network Domain TCP
connections between the WX switch and the specified Network Domain
seed are closed.
Syntax —
clear network-domain seed-ip ip-addr
ip-addr
— IP address of the Network Domain seed in dotted decimal notation.
Defaults — None.
Access — Enabled.
History —Introduced in MSS 4.1.
Usage — This command has no effect if the WX switch is not configured as
part of a Network Domain, or if the WX switch is not configured as a
member of a Network Domain that uses the specified Network Domain seed.
part of a Network Domain, or if the WX switch is not configured as a
member of a Network Domain that uses the specified Network Domain seed.
The following command removes the Network Domain seed with IP
address 192.168.9.254 from the WX switch’s configuration:
address 192.168.9.254 from the WX switch’s configuration:
WX1200# clear network-domain seed-ip 192.168.9.254
success: change accepted.
success: change accepted.
See Also