3com WX1200 用户手册
352
C
HAPTER
11: M
ANAGED
A
CCESS
P
OINT
C
OMMANDS
Examples — The following command sets the channel interval for radios
in radio profile rp2 to 2700 seconds (45 minutes):
in radio profile rp2 to 2700 seconds (45 minutes):
WX4400# set radio-profile rp2 auto-tune channel-interval 2700
success: change accepted.
success: change accepted.
See Also
set radio-profile
auto-tune
power-backoff-
timer
auto-tune
power-backoff-
timer
Sets the interval at which radios in a radio profile reduce power after
temporarily increasing the power to maintain the minimum data rate for
an associated client. At the end of each power-backoff interval, radios
that temporarily increased their power reduce it by 1 dBm. The power
backoff continues in 1 dBm increments after each interval until the power
returns to expected setting.
temporarily increasing the power to maintain the minimum data rate for
an associated client. At the end of each power-backoff interval, radios
that temporarily increased their power reduce it by 1 dBm. The power
backoff continues in 1 dBm increments after each interval until the power
returns to expected setting.
Syntax —
set
radio-profile
name auto-tune
power-backoff-timer
seconds
name
— Radio profile name.
seconds
— Number of seconds radios wait before lowering the power
by 1 dBm. You can specify from 0 to 65535 seconds.
Defaults — The default power-backoff interval is 10 seconds.
Access — Enabled.
History —Introduced in MSS Version 3.0.
A radio can increase power again if required to preserve the minimum
data rate for an associated client.
data rate for an associated client.
Examples — The following command changes the power-backoff
interval for radios in radio profile rp2 to 15 seconds:
interval for radios in radio profile rp2 to 15 seconds:
WX4400# set radio-profile rp2 auto-tune
power-backoff-timer 15
success: change accepted.
power-backoff-timer 15
success: change accepted.
See Also