3com WX1200 用户手册
70
C
HAPTER
4: P
ORT
C
OMMANDS
Examples — The following command shows octet statistics for port 3:
WX1200> display port counters octets port 3
Port Status
Port Status
Rx Octets
Tx Octets
=============================================================================
3
Up
27965420
34886544
This command’s output has the same fields as the monitor port counters
command. For descriptions of the fields, see Table 17 on page 78.
command. For descriptions of the fields, see Table 17 on page 78.
See Also
display port-group
Shows port group information.
Syntax —
display port-group [all | name group-name]
all
— Shows information for all port groups.
name
group-name
— Shows information for the specified port group.
Defaults — None.
Access — All.
History — Introduced in MSS Version 3.0.
Examples — The following command displays the configuration of port
group server2:
group server2:
WX1200# display port-group name server2
Port group: server2 is up
Ports: 5, 7
Port group: server2 is up
Ports: 5, 7
Table 11 describes the fields in the display port-group output.
Table 11 Output for display port-group
Field
Description
Port group
Name and state (enabled or disabled) of the port
group.
group.
Ports
Ports contained in the port group.