3com 4500 26-PORT 用户手册
Routing Table Display Commands
143
For detailed information of the output information, refer to
.
display ip routing-table
protocol
Syntax
display ip routing-table protocol protocol [ inactive | verbose ]
View
All views
Parameters
protocol
Enter one of the following:
■
direct
Displays the direct connection route information
■
static
Displays the static route information.
■
ospf
Displays OSPF route information.
■
ospf-ase
Displays OSPF ASE route information.
■
ospf-nssa
Displays OSPF NSSA route information.
■
rip
Displays RIP route information.
inactive
Enter to display inactive route information. Without this parameter, the
command displays both active and inactive route information. Optional.
verbose
Enter to display verbose route information. Without this parameter, the
command displays the route summary. Optional.
Description
Use the
display ip routing-table protocol
command to view the route
information for a specified protocol.
Example
To display a summary of all direct connection routes, enter the following:
<4500>display ip routing-table protocol direct
The information displays in the following format:
DIRECT Routing tables:
Summary count: 4
DIRECT Routing tables status:<active>:
Summary count: 3
Destination/Mask
Protocol Pre Cost Nexthop
Interface
20.1.1.1/32
DIRECT 0
0
127.0.0.1
InLoopBack0
127.0.0.0/8
DIRECT 0
0
127.0.0.1
InLoopBack0
127.0.0.1/32
DIRECT 0
0
127.0.0.1
InLoopBack0
DIRECT Routing tables status:<inactive>:
Summary count: 1
Destination/Mask
Protocol Pre
Cost
Nexthop
Interface
210.0.0.1/32
DIRECT 0 0
127.0.0.1
InLoopBack0
To display a summary of all static route information, enter the following:
<4500>display ip routing-table protocol static