3com 3000 TX 用户手册
Spanning Tree Protocol
5-17
Enabling STP on the Switch
To enable STP on your Switch:
1
From the VT100 Main Menu, select SWITCH
MANAGEMENT. The Switch Management screen is
displayed.
MANAGEMENT. The Switch Management screen is
displayed.
2
In the Management Level field, choose Unit.
3
Choose the SETUP button. The Unit Setup screen is
displayed as shown in
displayed as shown in
4
In the Spanning Tree field, specify Enable.
5
Choose OK.
You cannot enable STP if you have set up resilient
links on any of the Switch ports, or if you are using
VLAN 16.
links on any of the Switch ports, or if you are using
VLAN 16.
Figure 5-13 Unit Setup screen