Edimax Technology ES-3124REM 用户手册

 

52

 

This page can change the status of each port. Press <Space> 

key to change configuration of each item. 

 

 

 
1. InRate(100K/unit): You can set input rate control, per unit is 

100K. The valid range is 0~1000. 
0: disable rate control. 
1~1000: valid rate value. 

2. OutRate(100K/unit): You can set output rate control, per 

unit is 100K. The valid range is 0~1000. 
0: disable rate control. 
1~1000: valid rate value. 

3.Enable:  You can disable or enable this port control. “Yes” 

means the port is enabled, “No” means the port is disabled. 

4.Auto:  You can set auto-negotiation mode as Auto, 

Nway_Force or Force of each port. 

5.Spd/Dpx:  You can set 100/10Mbps speed on port 1~port24; 

1000/100/10Mbps speed on port25~port26 (Gigabit Switch), 
100/10Mbps speed on port25~port26 (Fast Ethernet Switch) 
and set full-duplex or half-duplex mode. 

Full: Displays the flow control status is enable/disable in full