Edimax Technology ES-3124REM 用户手册
97
6.3 Upload Configure File
In this page you can save current EEPROM values to image
file. Then go to the update configure page to restore the
EEPROM values.
1. Start the TFTP server.
2. Press <Edit> on this page.
3. TFTP Server: Type the IP of TFTP server.
4. Remote File Name: Type the image file name.
5. Press Ctrl+A go to action line.
6. Press <Save> key, it will start to upload the image file.
7. When save successfully, the image file upload finished too.
8. Restart switch.
EEPROM values.
1. Start the TFTP server.
2. Press <Edit> on this page.
3. TFTP Server: Type the IP of TFTP server.
4. Remote File Name: Type the image file name.
5. Press Ctrl+A go to action line.
6. Press <Save> key, it will start to upload the image file.
7. When save successfully, the image file upload finished too.
8. Restart switch.