Sun Microsystems 5802 用户手册

38

Enterprise Fabric Suite 2007 User Guide • September 2008

2.  At the replacement switch:

a. Mount the switch in the location where the failed switch was removed.

b.  Install the SFPs using the same ports as were used on the failed switch.

Do not reconnect inter-switch links, target devices, and initiator devices 

at this time. Doing so could invalidate the fabric zoning configuration.

c.  Attach the AC power cords and power up the switch.

3.  Select the failed switch in the topology display. Open the Switch menu and select 

Delete.

4.  Restore the configuration from the failed switch to the replacement switch:

a. Open a new fabric to the replacement switch.

b.  Open the faceplate display for the replacement switch. Open the Switch menu 

and select Restore.

c.  In the Restore dialog, enter the archive file from the failed switch or browse for 

the file.

d. Click the Restore button.

5.  Reset the replacement switch to activate the configuration formerly possessed by 

the failed switch including the domain ID and the zoning database. Open the 
Switch menu and select Reset Switch.

6.  Reconnect the inter-switch links, target devices, and initiator devices to the 

replacement switch using the same ports as were used on the failed switch.

Displaying Fabric Information

The topology display is your primary tool for monitoring a fabric. The graphic 
window of the topology display provides status information for switches, inter-
switch links, and the Ethernet connection to the management workstation. Refer to 
Link data window (

) for more information.

The topology display data windows show device, active zone set, switch, and link 
information.