Sun Microsystems 5602 用户手册
4 – Managing Switches
Managing Switch Stacks
Managing Switch Stacks
4-34
59097-01 A
0
The stack dialogs are essentially the same as their corresponding switch dialogs,
except for the Select Switch for Initial Configuration pull-down menu is added to
each dialog. The stack dialogs display the information for the switch selected in
the Select Switch for Initial Configuration pull-down menu. Choose another switch
in the pull-down menu to display information for that switch. The switch
configuration displayed is the configuration that will be applied to all other
switches in the stack after you click the OK button. The following operations are
available to configure the stack as a single entity:
except for the Select Switch for Initial Configuration pull-down menu is added to
each dialog. The stack dialogs display the information for the switch selected in
the Select Switch for Initial Configuration pull-down menu. Choose another switch
in the pull-down menu to display information for that switch. The switch
configuration displayed is the configuration that will be applied to all other
switches in the stack after you click the OK button. The following operations are
available to configure the stack as a single entity:
Date/time and Network Time Protocol (NTP) settings. Refer to
for more information.
Firmware load and activation. Refer to
for
more information.
for more
information.
Edit zoning configuration. Refer to
for more information.
Editing user accounts. Refer to
more information.
information.
Syslog configuration. Refer to
Additional stack operations include:
Refresh the stack to update the faceplate display with current information for
all switches in the stack
all switches in the stack
Select all ports on all switches in the stack
Remove a switch from a stack. Choose this option after a switch no longer
has a 10-Gbps link. The switch icon is moved from the stack icon and
becomes a single switch icon in the topology display.
has a 10-Gbps link. The switch icon is moved from the stack icon and
becomes a single switch icon in the topology display.