Sun Microsystems 5602 用户手册
59097-01 A
Glossary-3
SANbox 5602 Switch Management
User’s Guide
0
In-Order-Delivery
A feature that requires that frames be
received in the same order in which they
were sent.
received in the same order in which they
were sent.
Input Power LED
A chassis LED that indicates that the
switch logic circuitry is receiving proper DC
voltages.
switch logic circuitry is receiving proper DC
voltages.
Inter-Switch Link
The connection between two switches
using E_Ports.
using E_Ports.
IP
Internet Protocol
LIP
Loop Initialization Primitive sequence
Logged-in LED
A port LED that indicates device login or
loop initialization status.
loop initialization status.
Maintenance Button
Formerly known as the Force PROM
button. Momentary button on the switch
used to reset the switch or place the switch
in maintenance mode.
button. Momentary button on the switch
used to reset the switch or place the switch
in maintenance mode.
Maintenance Mode
Formerly known as force PROM mode.
Maintenance mode sets the IP address to
10.0.0.1 and provides access to the switch
for maintenance purposes.
Maintenance mode sets the IP address to
10.0.0.1 and provides access to the switch
for maintenance purposes.
Management Information Base
A set of guidelines and definitions for
SNMP functions.
SNMP functions.
Management Workstation
PC workstation that manages the fabric
through the fabric management switch.
through the fabric management switch.
Mesh Topology
A fabric in which each chassis has at least
one port directly connected to each other
chassis in the fabric.
one port directly connected to each other
chassis in the fabric.
MIB
Management Information Base
Multistage Topology
A fabric in which two or more edge
switches connect to one or more core
switches.
switches connect to one or more core
switches.
NL_Port
Node Loop Port. A Fibre Channel device
port that supports arbitrated loop protocol.
port that supports arbitrated loop protocol.
N_Port
Node Port. A Fibre Channel device port in
a point-to-point or fabric connection.
a point-to-point or fabric connection.
Pending Firmware
The firmware image that will be activated
upon the next switch reset.
upon the next switch reset.
POST
Power On Self Test
Power On Self Test (POST)
Diagnostics that the switch chassis
performs at start up.
performs at start up.
Principal Switch
The switch in the fabric that manages
domain ID assignments.
domain ID assignments.
SANsurfer Switch Manager
Switch management application.
SFP
Small Form-Factor Pluggable.