Sony MKS-2010 用户手册
Ch
apt
e
apt
e
r 2
N
a
mes
and
Fun
c
tions
of
P
of
P
a
rt
s
14
Control Panel Configuration
Note
This button does not light and does not function when you
are using the rightmost buttons in the cross-point button
rows (the 12th or 20th buttons) as [SHIFT] button.
are using the rightmost buttons in the cross-point button
rows (the 12th or 20th buttons) as [SHIFT] button.
For more information about operations to use the
rightmost buttons as [SHIFT] buttons, see “To use the
rightmost buttons in cross-point button rows as [SHIFT]
buttons (shift mode selection)” (page 158).
rightmost buttons as [SHIFT] buttons, see “To use the
rightmost buttons in cross-point button rows as [SHIFT]
buttons (shift mode selection)” (page 158).
d Tally indicators
Currently not used.
Currently not used.
PGM/PST Cross-Point Control Block
Use the PGM/PST (program/preset) cross-point control
block to select the video signals to be used as the
background in program video (final output video).
block to select the video signals to be used as the
background in program video (final output video).
This control block is found only on the 1.5 M/E and 1.5 M/
E wide panels.
E wide panels.
a Cross-point button rows
The buttons in the PGM (program) row select the
background video which is output before the start of a
transition. The buttons in the PST (preset) row select the
background video after the end of a transition.
The signals selectable with the cross-point buttons are the
same as the signals selectable with the corresponding
buttons in the M/E cross-point control block (see page 12).
The meaning of the colors in which buttons light and
button numbers are also the same. The [M/E] buttons at the
right edge of each cross-point button row are reentry
buttons. They allow you to import video created in the M/
E block and use it as background video in the PGM/PST
block.
The buttons in the PGM (program) row select the
background video which is output before the start of a
transition. The buttons in the PST (preset) row select the
background video after the end of a transition.
The signals selectable with the cross-point buttons are the
same as the signals selectable with the corresponding
buttons in the M/E cross-point control block (see page 12).
The meaning of the colors in which buttons light and
button numbers are also the same. The [M/E] buttons at the
right edge of each cross-point button row are reentry
buttons. They allow you to import video created in the M/
E block and use it as background video in the PGM/PST
block.
b XPT (cross-point) HOLD button
By pressing this button to turn it on (it lights in amber), you
can recall a snapshot while retaining the current cross-
point button selection state. (The cross-point selection
information in the snapshot is ignored.)
By pressing this button to turn it on (it lights in amber), you
can recall a snapshot while retaining the current cross-
point button selection state. (The cross-point selection
information in the snapshot is ignored.)
c SHIFT button
Press this button, turning it on, to use the cross-point
buttons as shift side buttons. Press it again, turning it off,
to use the cross-point buttons as non-shift side buttons
Press this button, turning it on, to use the cross-point
buttons as shift side buttons. Press it again, turning it off,
to use the cross-point buttons as non-shift side buttons
Note
This button does not light and does not function when you
are using the rightmost buttons in the cross-point button
rows (the 12th or 20th buttons) as [SHIFT] button.
are using the rightmost buttons in the cross-point button
rows (the 12th or 20th buttons) as [SHIFT] button.
For more information about operations to use the
rightmost buttons as [SHIFT] buttons, see “To use the
rightmost buttons in cross-point button rows as [SHIFT]
buttons (shift mode selection)” (page 158).
rightmost buttons as [SHIFT] buttons, see “To use the
rightmost buttons in cross-point button rows as [SHIFT]
buttons (shift mode selection)” (page 158).
d Tally indicator
Currently not used.
Currently not used.
BLACK
COLOR
BKGD
M/E
BLACK
COLOR
BKGD
M/E
XPT
HOLD
SHIFT
PGM/PST
PST
PGM
PGM row
1
Cross-point button rows
PST row
2
XPT HOLD button
3
SHIFT button
4
Tally indicator
M/E buttons