Sony MKS-2010 用户手册

Ch
ap
te

r 9
   Sys

tem Set

tings

155

Basic Settings

The popup window in the Startup Mode menu closes, 
and a confirmation message appears, prompting 
whether or not to change the mode.

Press [Yes] in the dialog box.

This changes the mode.

To cancel changing the mode
Press [No] in the dialog box.

Carry out step 1 in the previous item, “Selecting 
resume mode for starting up after powering on.” 

If [Resume] is On, set it to Off.

Press [Setup].

A popup window appears.

Press [User] or [Factory].

The popup window closes, and a confirmation 
message appears, prompting whether or not to change 
the mode.

Press [Yes] in the dialog box.

This changes the mode.

To cancel changing the mode
Press [No] in the dialog box.

To set initial status to custom mode
In step 2 of the above procedure, “To set setup to custom 
mode,” in place of [Setup], press [Init Status].
The remainder of the operation is the same.

Assign output signals to each output port of the processor.

From the top menu, select Setup/Diag >Input/Output 
>Output Assign.

The Output Assign menu appears. The status area 
shows output port numbers and the output signals 
assigned to each port.

Select the output port number for which you want to 
make the setting.

• Press directry on the list in the status area.
• Use the arrow buttons to scroll the reverse video 

cursor.

• Turn the knob.

a) Values 5 to 8 are only valid when the MKS-2110M (option) is 

installed.

The selected output port number appears in reverse 
video.

Press [Out Assign].

A popup window appears. The assignable output 
signals are shown.

Assignable output signals
• M/E PGM (M/E program signal)
• M/E PVW (M/E preview signal)
• M/E Key PVW (M/E key preview signal), M/E Key 

Out (M/E key output signal), or M/E PGM Clean 
(M/E program clean signal): The display varies 
depending on the setting of [M/E Key PVW] in the 
Output Assign menu.

1 (No)

Output port number selection

1 to 8 

a)