Sony 9000 用户手册
Ch
apt
apt
er 1
D
V
S-9
000
F
u
n
c
tion
s
s
154
Setup
• Xpt Hold mode: Set the operation mode for the cross-point hold button
provided on the key bus for each of the M/E and P/P banks.
• Pattern Limit Transition: Set the operation mode when the pattern limit is
released for each of the M/E and P/P banks.
• Wipe Edge Default: Adjust the wipe edge softness for each of the M/E and
P/P banks.
• FM Auto Store: Switch on or off the function to automatically attach a name
and save in frame memory.
Link settings (Link)
• Internal Bus Link: Make a setting of the bus link function that links
together two buses internal to the switcher.
• GPI Link: Make settings for linking any cross-point buttons or [CUT] and
[AUTO TRANS] buttons in the cross-point control block and GPI output
ports.
ports.
External device connections (Device Interface)
• Remote Assign: Set the use of the four 9-pin ports.
• GPI Input: Set the GPI input ports and trigger polarities, and make the
• GPI Input: Set the GPI input ports and trigger polarities, and make the
action settings.
• GPI Output: Set the GPI output ports and trigger polarities, and make the
action settings.
• Aux Control: Set whether operations on the Aux buses from the four 9-pin
ports are inhibited.
DME Setup
In DME setup, carry out settings particular to the DME processor.
You can make the following settings.
You can make the following settings.
Input signal settings (Input)
• Initial Crop: Make the initial crop setting.
• Matte Illeg. Color Limit: Switch the illegal limiter for the signal generated
• Matte Illeg. Color Limit: Switch the illegal limiter for the signal generated
by the DME internal matte generator on or off.
Interface with external devices (Device Interface)
• Editor Protocol: Set the protocol to be used on the Editor port.
• Editor Port Setting: Make settings relating to the control of the four editor
• Editor Port Setting: Make settings relating to the control of the four editor
ports installed in the DME.
• GPI Input: Set the GPI input ports and trigger polarities, and make the
action settings.