Sony 9000 用户手册
263
Key Setting Operations Using Menus
Chapt
er
4
K
e
y
s
Key Type Setting
Setting the key type in a menu
Use the following procedure.
1
In the M/E-1>Key1 menu, select HF1 ‘Type.’
The Type menu appears.
2
In the <Key Type> group, select the key type.
Luminance: luminance key
Linear: linear key
Chroma: chroma key
Color Vector: color vector key
Wipe Pattern: wipe pattern key
Key Wipe Pattern: key wipe pattern key
Linear: linear key
Chroma: chroma key
Color Vector: color vector key
Wipe Pattern: wipe pattern key
Key Wipe Pattern: key wipe pattern key
For the selected key type, you can now set the parameters.
For an overview of the key types, see page 46.
3
Carry out the following settings as required, depending on the key type
selected in step
selected in step
2
.
To enable clean mode (see page 47) for a luminance key, linear key or
color vector key: Select [Clean Mode] so that it is set on.
When clean mode is enabled, key fill is added to the background
without cutting out with key source.
When clean mode is enabled, key fill is added to the background
without cutting out with key source.
When chroma key is selected: Select [Chroma Adjust] to access the
Chroma Adjust menu (see page 266), and make the required settings.
When a wipe pattern key is selected: In the M/E-1>Wipe menu (see page
304), select the pattern and set any modifiers, then return to the M/E-
1>Key1 menu.
1>Key1 menu.
When a key wipe pattern key is selected: In the M/E-1>Key1>
Transition>Wipe Adjust menu (see page 322), carry out pattern
selection and modifier setting, then return to the M/E-1>Key1>Type
menu.
selection and modifier setting, then return to the M/E-1>Key1>Type
menu.
Note
For a wipe pattern selected for a wipe pattern key or key wipe pattern key,
the [Edge] and [Direction] modifier settings are not available.
the [Edge] and [Direction] modifier settings are not available.
4
Set the parameters.