Avaya 580 用户手册
Document No. 10-300077, Issue 2
5-19
Configuring SNMP
defines the command keywords and variables.
Creating or Modifying a Community String for the ATM-
Uplink Module
Uplink Module
To create or modify a community string to access the ATM-Uplink module,
use the following CLI command:
use the following CLI command:
(configure)#
snmp-server atm-community <community-string>
<slot> {ro | rw} [<ip-addr>]
defines the command keywords and variables.
Table 5-8. snmp-server community
Field
Definition
<community-
string>
string>
The name of the community string. The community
string can range from 1 to 26 characters.
string can range from 1 to 26 characters.
Important: Do not assign a community string and
SNMPv3 user the same name.
<groupname>
Name of the group to which you are assigning the
community string.
community string.
Important: Do not assign the community string to a
group that requires authentication or
encryption. Community strings do not
support authentication or encryption.
encryption. Community strings do not
support authentication or encryption.
<ip-addr>
The IP address from which the community string is
valid. Trap messages are sent to this IP address if you
enter the notify option.
valid. Trap messages are sent to this IP address if you
enter the notify option.
[notify]
Sends trap messages to the IP address that you specify.
Table 5-9. snmp-server community
Field
Definition
<community-
string>
string>
The name of the community string. The community
string can range from 1 to 26 characters.
string can range from 1 to 26 characters.
Important: Do not assign a community string and
SNMPv3 user the same name.
<slot>
The slot number of the ATM Uplink module.
1 of 2