Avaya M770 用户手册

Chapter 6

Managing Virtual Ports

Avaya M770 ATM Switch User’s Guide

89

To clear signalling counter for a virtual port, use the 

vport sig resetstats

 

command:

Managing Connections

To list the details of all virtual circuits, use the

vport connections all

 

command. 

The 

vport connections all

 

command displays all SVCs, PVCs, and internal 

virtual circuits such as ILMI signalling that are set up on the M770 ATM Switch. 
Information displayed in the output is described in Table 6.7.

To list the details of all SVCs, use the

vport connections svcs

command. 

Command:

M15-155s8:/>vport sig   resetstats <vport id>

Example:

M15-155s8:/>vport sig   resetstats   2.9.0 

Parameter:

<vport id>

The virtual port identifier is displayed as 
<slot>.<port>.<virtual port number>

Output:

Done!

Command:

M15-155s8:/>vport connections all

Command:

M15-155s8:/>vport connections svcs [nomesh] [addr] [td] 

[<vport id>] [src|dst] [<vportid>] [dir]

Example:

M15-155s8:/>vport connections svcs nomesh addr 8.1.0

Parameters:

[nomesh]

Lists SVCs passing through the vport (except for LANE 
mesh SCVs)

[addr]

Lists the ATM addresses where available

[td]

Displays the ATM Traffic Descriptor

[<vport id>]

Lists all SVCs passing through the vport

[<vport id>]

[src|dst]

Lists the incoming/outgoing SVCs from/to the vport

[<vport id>]

[<vport id>]

Lists all SVCs between the two vports

[<vport id>]

[<vport id>]

dir

Lists all SVCs from the 1st vport to the 2nd vport