Avaya M770 用户手册

Chapter 10

Managing PNNI Routing

Avaya M770 ATM Switch User’s Guide

153

Showing PNNI PGLE parameters

Set PNNI PGLE parameters to default values

Use the following command to set the PNNI node PGLE parameters to their default
values:

This request will set value for PGLE parameter according to the index parameter.
Changes will take effect immediately.

Set PNNI PGLE Parameter

Use the following command to set the PNNI node PGLE parameters:

This request will set value for PGLE parameter according to the index parameter.
Changes will take effect immediately.

Command:

M15-155s8:/>route pnni config pgle show [<level>]

Output:

Svcc Table - Level 1:

Name

Index

Current

Default

Value

---------------------------------------------------

--------

Leadership priority

initTimerPeriod

15000

overrideTimerPeriod

30000

reElectionTimerPeriod

15000

Command:

M15-155s8:/>route pnni config pgle default [<level>]

[<index>]

Parameters:

<level> - internal PNNI level number: 1 is the physical

node

<index> - the index of the timer

Command:

M15-155s8:/>route pnni config pgle set <level> <index>

<value>

Parameters:

<level> - internal PNNI level number: 1 is the physical

node

<index> - the index of the timer

<value> - the vlaue that the selected timer will receive