Avaya M770 用户手册

Chapter 11

Managing the Management LEC

Avaya M770 ATM Switch User’s Guide

167

This command is used after changing the management LEC configuration.
To restart the management LEC, use the

lane lec restart

command. 

The above command may disrupt Telnet and SNMP management sessions.

You can display the management LEC’s LANE-ARP (Address Resolution Protocol) 
cache. This is a list of all other LECs in the ELAN that have sent specifically-
addressed LAN frames to the management LEC, or that the management LEC has 
sent frames to. These frames include Telnet session control and data frames, SNMP 
requests and responses, and PING requests and responses. 
There are two kinds of entries that are displayed in the LANE-ARP cache:
•

MAC addresses, which are normally other nodes on the ELAN. 

•

Route Descriptors (RDs), which occur only in a source-routed Token Ring 
ELAN and show either destinations for frames that must cross a source-routing 
bridge, or a device that bridges from ATM to physical Token-Ring networks.

To view the LANE ARP cache, use the 

lane lec arpcache

 command. 

Command:

M15-155s8:/>lane lec restart

Command
:

M15-155s8:/>lane lec arpcache

Output: 

Destination  00.10.5A.0A.C0.3B

   ATM address  39.84.0F.80.01.BC.61.DF.00.87.00.77.01.00.40.0D.64.02.DE.81

   DataDirect VC Vpi:0, Vci:751

Destination  00.40.0D.5A.01.4E

   ATM address  39.84.0F.80.01.BC.61.DF.00.87.00.77.01.00.40.0D.64.02.DE.81

   DataDirect VC Vpi:0, Vci:751