Avaya M770 用户手册

Chapter 15

Managing the LES/BUS

206

Avaya M770 ATM Switch User’s Guide

To change the ELAN name that the LES will host, use the

lane les elan

command. 

The above command will take immediate effect. The command must be used 

with care as all LECs will be thrown off the ELAN hosted by the LES. If a LEC is 
configured to use the old ELAN name then it must be reconfigured manually to use 
the new ELAN name.

Before you change the registration mode of a LES, you must be aware of the mode 
of the ELAN that it will be hosting and that the choice of mode is supported by the 
device containing the LECS.
Refer to Table 15.3 a list of compatible LES and ELAN modes that should be used.

By default for the pre-defined ELANs, the LES mode is set to register automatically 
and the LES modes are set to distributed:
To change the registration mode of the LES, enter the

lane les mode

command. 

Command:

M15-155s8:/>lane les elan <old-name> <new-name>

Example:

M15-155s8:/>lane les elan marketing_eth mrk_eth

Parameters:

<old-name>

The current name of the ELAN that is hosted by 
the LES that you want to change.
This parameter is case-sensitive.

<new-name>

The new ELAN that is somewhere on the network 
and is known to the LECS that the local LES will 
host. This parameter is case-sensitive.

LES mode

LECS ELAN mode

distributed

auto

standby

auto

manual

manual

Command:

M15-155s8:/>lane les mode <elan-name> {distributed | standby | manual}

Example:

M15-155s8:/>lane les mode marketing_eth standby