Avaya M770 用户手册

Chapter 19

Upgrading Avaya M770 ATM Switch Software

248

Avaya M770 ATM Switch User’s Guide

To delete a file from the flash memory bank, use the

flash delete

command. You 

will be asked to confirm the deletion.

Once a file is deleted it cannot be recovered. The file must be downloaded 

again. You must not delete the config.data file during normal operation, as this will 
reset all the LANE configuration on the module.
If you want to reset the module’s LANE parameters to the factory defaults, delete or 
rename the config.data file. The module will create a new config.data file based on 
LANE factory defaults.

To rename a file in the flash memory bank, use the

flash rename

command. 

Command:

M15-155s8:/>flash delete <filename>

Example

M15-155s8:/>flash delete m770ATM

Parameter: 

<filename>

The name of the file you wish to delete from the flash 
directory.

Command:

M15-155s8:/>flash rename <old_name> <new_name>

Example

M15-155s8:/>flash rename m770ATM fieldrelease

Parameters: 

<old_name> 

The current name of the flash file.

<new_name>

The new name you wish to assign to the file.