Avaya M770 用户手册
Chapter 6
Managing Virtual Ports
68
Avaya M770 ATM Switch User’s Guide
Setting the ILMI version on a virtual port
This parameter changes the ILMI version used on this vport. By default, this
parameter is ILMI 4.0 which is backwards compatible with devices using ILMI 3.1.
To set the ILMI version on the virtual port use the
parameter is ILMI 4.0 which is backwards compatible with devices using ILMI 3.1.
To set the ILMI version on the virtual port use the
vport set ilmiver
command.
Resetting the ILMI version on a virtual port
If you reset the virtual port’s ILMI version parameter, the port will re-learn the ILMI version
when it is enabled and a remote device is connected.
when it is enabled and a remote device is connected.
To reset the ILMI version on the virtual port, use the
vport reset
ilmiver
command.
Command:
M15-155s8:/>vport set ilmiver <vport id> [31 | 40]
Example:
M15-155s8:/>vport set ilmiver 8.1.0 31
Parameters:
<vport id>
The virtual port in the form <slot>.<port>.<virtual port number>.
[31 | 40]
Changes the ILMI Version to ILMI 3.1 or 4.0
Command:
M15-155s8:/>vport reset ilmiver <vport id>
Example:
M15-155s8:/>vport reset ilmiver 8.1.0
Parameters:
<vport id>
The virtual port in the form <slot>.<port>.<virtual port number>.