Avaya P330-ML-ML 用户手册
Chapter 3 Avaya P330-ML Layer 3 CLI Commands
252
Avaya P330-ML Reference Guide
Example:
show ip arp
User level: user, privileged, supervisor
Use the show ip arp command to display the Address Resolution Protocol (ARP)
cache.
Use the show ip arp command to display the Address Resolution Protocol (ARP)
cache.
The syntax for this command is:
show ip arp [<if-name> | <vlan> | <ip addr> | <ip-mask> static]
Example:
L If you wish to enter a name which includes spaces, you must enclose the entire
name in quotation marks, for example “new york”.
Router-N> show ip access-list-summary
The policy lists summary:
default List (0)
if-name
Interface name (string up to 32 chars)
vlan
VLAN NAME (string up to 16 chars) or VLAN ID (number)
ip-addr
The IP address of the station(s)
ip-mask
The ip mask of the routes.
static
Display static ip ARP information.
Router-N> show ip arp
Showing 3 rows
Address MAC Address Interface Type TTL
--------------- ----------------- ------------ ------- --------
192.168.54.1 00:40:0d:8c:12:01 mgmt Dynamic 14360
192.168.2.33 00:40:0d:5c:14:01 loco Static Not Aged
192.168.1.111 00:40:0d:5d:72:01 ppp Static Not Aged