HP (Hewlett-Packard) 1410-16G 用户手册
1
HP ProCurve 1410-16G Switch Quick Setup Guide
For more detailed information to set up your switch, view or download the Installation and Getting Started Guide for your
switch at
switch at
www.hp.com/go/procurve/manuals.
1.
Unpack and check included parts.
■
Documentation kit
•
•
Read Me First
•
Quick Setup Guide
•
Safety and Regulatory information
•
Software License Agreement and Hardware Warranty
information
information
■
Switch
■
Accessory kit (installation hardware)
■
AC power adapter (and power cord, if applicable)
2.
Prepare for installation. To avoid personal injury or product damage, review the “Safety Precautions” on
3
. Connect power and verify that the switch power LED turns on.
The switch does not contain a power switch. It is
turned on by connecting power through the AC power adapter supplied with your switch.
1
2
3
1
2
Power LED = On
4.
Install the Switch Hardware.
Turn off the switch before installing the switch hardware.
Table or Desktop:
Attach the four self-adhesive pads
(included in the accessory kit) to the bottom corners of
the switch.
the switch.
© Copyright 2010 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without
notice.
notice.
Printed in China
February 2010
5998-0343
*5998-0343*
QSG-1410-16G-Feb2010.fm Page 1 Thursday, February 25, 2010 7:45 PM