Pioneer k DVD-RW 16x4 int ATAPI 10pk bulk black DVR-108BK?10PK 用户手册

 

The media is formatted using Write Parameter Mode Page information. Some parameters in the Write Parameter Mode Page shall be 
set as follows; 
Test Write = 0, Write Type = 0h, FP = 1, Track Mode = 01x1b, Data Block Type = 8h or Ah, 
Session Format = 00h or 20h, Packet Size = 20h 

This format operation is always available regardless of the media condition.   

The media is inserted in the drive, the area from the beginning of the RMA to the end of the Lead-out will be recorded. There is only 
one bordered area on the medium and the number of RZone is one after this operation. 

The Test Write bit in the Write Parameters Mode Page shall be set to zero. 

This format operation is available on any recording mode and any state of a bordered area. 

Formatting to create a Session/Border on C/DVD-RW media is specified. 

If the Immed function is set to zero, the drive will return the status after the format operation has completed. If the Immed bit is set to 
one, the drive will return the status as soon as the command descriptor block has been validated, and the entire Format Descriptor has 
been transferred. 

The READ DISC INFORMATION Command, the READ TRACK/RZONE INFORMATION Command and the TEST UNIT 
READY Command is used to detect completion of the format operation. While format operation is performed by the FORMAT 
UNIT Command that the Immed function is set to one, the drive terminates these commands with the Check Condition status, 
LOGICAL UNIT NOT READY, FORMAT IN PROGRESS (2/04/04). If the drive returns Good status for these command, format 
operation has completed. 

In response to the REQUEST SENSE command, including after the Check Condition status described above, the drive will return a 
SK/ASC/ASCQ values set to NOT READY/LOGICAL UNIT NOT READY/FORMAT IN PROGRESS, with the sense key specific 
bytes set for progress indication. The SKSV will be set to one and the Progress Indication field will contain 16 bit unsigned value such 
that (Progress  Indication)/65 536 X 100% approximates the percentage of completion of the operation. Once the  operation is 
completed, the SKSV will be cleared to zero. 

The created Session will become the only Session on the medium. The Number of Blocks field specifies the number of addressable 
blocks for the new Session and the Type Dependent Paramet er field specifies the Fixed Packet Size (32). The  Number of Blocks  field 
may be adjusted to a value less than or equal to the values  reported by the READ FORMAT CAPACITIES Command. The drive will 
round the Number of Blocks up to be an integral multiple of the packet size. 
Some parameters in the Write Parameter Mode Page shall be set as follows; 
Test Write = 0, Data Block Type = 8h or Ah, Session Format = 00h or 20h 
After the FORMAT UNIT command is received by the drive, some parameters in the Write Parameter Mode Page will be modified as 
follows; 
Write Type = 0h, FP = 1, Track Mode = 01x1b, Packet Size = 20h 

This format operation is always available regardless of the media condition.   

The created Border will become the only Border on the medium. The Number of Blocks  field specifies the number of addressable 
blocks for the new Border and the Type Dependent Parameter  field specifies the ECC block size (16). The  Number of Blocks  field 
may be adjusted to a value less than or equal to the values  reported by the READ FORMAT CAPACITIES Command. The drive will 
round the Number of Blocks up to be an integral multiple of the ECC block size. 

The Test Write bit in the Write Parameters Mode Page shall be set to zero. 

This format operation is available on any recording mode and any state of a bordered area. The number of RZone in the created Border 
is one after this operation.