Black Box ServSwitch CX 用户手册

®

The ServSwitch CX with IP models 
provide an autosensing Ethernet 
IP port that can operate at 10 or 
100Mbps, according to the network 
speed. The ServSwitch CX with IP 
models are designed to reside quite 
easily at any part of your network: 

•  They can be placed within 

the local network, behind any 
firewall/router connections to the Internet, or

•  They can be placed externally to the local network, on a separate sub-

network or with an open Internet connection.   

Wherever in the network a ServSwitch CX with IP is situated, you will need to 
determine certain configuration issues such as address allocation and/or firewall 
adjustment to allow correct operation. Please refer to 

 within 

the Configuration chapter for more details. 
IMPORTANT: When a ServSwitch CX with IP is accessible from the public Internet 
or dial up connection, you must ensure that sufficient 

1  Depending upon where in the network the ServSwitch CX with IP is being 

connected, run a category 5, 5e or 6 link cable from the appropriate hub or 
router to the ServSwitch CX with IP unit.

2  Connect the plug of the link cable into the IP port on the front panel of the 

ServSwitch CX with IP unit.

3  Configure the network settings as appropriate to the position of the 

 for 

details. 

®

®