Black Box ServSwitch CX 用户手册
®
Power in connection
The ServSwitch CX unit is supplied
with a single 30W power adapter
which is sufficient to supply any
configuration of the unit. All
ServSwitch CX units have two
power input sockets to allow
auxiliary (redundant) power
adapters to be connected. There
are no on/off switches, so operation
begins as soon as a power adapter
is connected.
Note: ServSwitch CX units require a heavy duty power adapter at either or
both power input connectors. Use only the adapter supplied with the unit or
available separately from Black Box. Do not use the standard 10W adapters that
are supplied with other Black Box products, such as the ServSwitch CX Remote
module.
with a single 30W power adapter
which is sufficient to supply any
configuration of the unit. All
ServSwitch CX units have two
power input sockets to allow
auxiliary (redundant) power
adapters to be connected. There
are no on/off switches, so operation
begins as soon as a power adapter
is connected.
Note: ServSwitch CX units require a heavy duty power adapter at either or
both power input connectors. Use only the adapter supplied with the unit or
available separately from Black Box. Do not use the standard 10W adapters that
are supplied with other Black Box products, such as the ServSwitch CX Remote
module.
To connect the power supply
1 Attach the output lead from the power adapter to the
MAIN PWR IN
socket
on the rear panel of the ServSwitch CX.
2 Connect the IEC connector of the supplied country-specific power lead to
the socket of the power adapter.
3 Connect the power lead to a nearby main supply socket.
4 Repeat steps 1 to 3 for the auxiliary power adapter (using the
4 Repeat steps 1 to 3 for the auxiliary power adapter (using the
AUX PWR IN
socket), if a backup supply is required.
Note: Both the ServSwitch CX and its power supply generate heat when in
operation and will become warm to the touch. Do not enclose them or place
them locations where air cannot circulate to cool the equipment. Do not operate
the equipment in ambient temperatures exceeding 40 degrees Centigrade. Do
not place the products in contact with equipment whose surface temperature
exceeds 40 degrees Centigrade. Using two power supplies will ensure that each
power supply takes less load and run at a correspondingly cooler temperature.
operation and will become warm to the touch. Do not enclose them or place
them locations where air cannot circulate to cool the equipment. Do not operate
the equipment in ambient temperatures exceeding 40 degrees Centigrade. Do
not place the products in contact with equipment whose surface temperature
exceeds 40 degrees Centigrade. Using two power supplies will ensure that each
power supply takes less load and run at a correspondingly cooler temperature.
OPTIONS
1
3
2
4
5V
5V
WARNING
!
RJ45
CONNECT
ORS
ON
THIS
PANEL
ARE
FOR
CONNECTIO
N
TO KVM
EQUIPMENT
ONL
Y.
DO
NOT
CONNECT
TO NETWORK
OR
TELEPHONE
SYSTEM
S
5A
5A
AUX
PWR
IN
MAIN
PWR
IN
CATx
USER
PORT
Made
in
the
U.K.
Indoor
use
only
1
2
3
ON
ServSwitch CX rear
panel
output lead from
power adapter
POWER
IN
®
724-746-5500
®