Bay Technical Associates 304 用户手册

Using the BayStack 303 and 304 Ethernet Switches

3-16

893-01010-A

The SNMP Configuration menu displays a list of the parameters that allow you to 
set and change values, parameters, and addresses within an SNMP management 
environment. To change any setting, type in the corresponding number. The screen 
is refreshed, and the command line displays the current parameter value for the 
selected parameter and allows you to enter new data. The SNMP configuration 
parameters that can be changed are listed on the screen as follows:

1---SNMP Read Community String

Sets the in-band read-only SNMP operations. Default setting is public.

2---SNMP Read/Write Community String

Sets the in-band read/write SNMP operations. Default setting is private.

3---Trap Receiver 1 Community Name and IP Address 

Number one of four allowed Trap IP Addresses. Successive Trap Address 
fields are numbered #2, #3, and #4. Each of the Trap addresses has an 
associated Community String. Default value is 0.0.0.0. (no IP address 
assigned) and public.

4---Trap Receiver 2 Community Name and IP Address 

5---Trap Receiver 3 Community Name and IP Address 

6---Trap Receiver 4 Community Name and IP Address 

7---Authentication Trap Generation

Enables or disables sending a trap on an SNMP authentication failure. Default 
setting is Disabled.

8---LinkUp/LinkDown Trap Generation

With the cursor at selections 1 or 2, pressing Enter without typing a 

selection deletes the current setting.

89301010.BK  Page 16  Tuesday, June 10, 1997  8:00 PM