Minicom Advanced Systems 232 IP 用户手册
SMART 216 / 232 IP
27
26. Accessing a Target server
Log in to the web interface as explained on page 13. The web interface opens at the
Targets page, see Figure 14 on page 15. To connect to a Target or serial device,
click the desired Target/device in the Server Name Column. (A server being used
by another user cannot be accessed). The screen of the Target/device appears inside
a remote console window. Note! For a User, only permitted Targets appear on the
Targets page. Figure 28 illustrates the remote console window.
Targets page, see Figure 14 on page 15. To connect to a Target or serial device,
click the desired Target/device in the Server Name Column. (A server being used
by another user cannot be accessed). The screen of the Target/device appears inside
a remote console window. Note! For a User, only permitted Targets appear on the
Targets page. Figure 28 illustrates the remote console window.
Toolbar icon
Server name
Remote
screen
border
screen
border
Minicom icon
Figure 28 Remote console window
On the remote console you have the following:
Server name - The currently accessed server identity can be checked any time by
looking at the Server name on the Internet Explorer title bar.
looking at the Server name on the Internet Explorer title bar.
Toolbar icon – This is the minimized toolbar from which you switch and configure
the system.
the system.
Minicom icon – Hold the mouse over the icon to view information about current
server, connection time and video mode.
server, connection time and video mode.
26.1 The Toolbar
To maximize the Toolbar:
Click the arrow . Click again to minimize the Toolbar.