Minicom Advanced Systems 5UM70166 用户手册
IP CONTROL
9
11.1 Static IP addresses for a number of units
Where you want to connect more than 1 IP Control to the same network and there
is no DHCP server, or you want to use static IP addresses, do the following:
is no DHCP server, or you want to use static IP addresses, do the following:
Connect the IP Control units one at a time and change the static IP address of each
unit before connecting the next unit.
unit before connecting the next unit.
12. Logging into the Web interface
Complete the initial setup via the Web configuration interface:
1. Open your Web browser (Internet Explorer version 6.0 or higher).
2. Type the IP Control system IP address - https://IP address/config - and press
Enter. The login page appears, see Figure 5.
Figure 5 Login page
3. Type the default Administrator user name - admin - and password - access -
(both lower case).
4. Press Enter. The Web interface opens at the Network Configuration page. See
Figure 6.
5. Bookmark the page for easy reference.
Figure 6 IP Control Web interface