Motorola CPCI-6115 用户手册
J95, Front Panel 10/100/1000 Megabits/s Ethernet Connector
Controls, LEDs, and Connectors
CPCI-6115 CompactPCI Single Board Computer Installation and Use (6806800A68D)
53
3.5.2
J95, Front Panel 10/100/1000 Megabits/s Ethernet Connector
The CPCI-6115 has one front panel 10/100/1000 megabit/s Gigabit Ethernet connector. It is an
industry standard RJ-45 connector with the following pin assignments:
industry standard RJ-45 connector with the following pin assignments:
3.5.3
CompactPCI J1/J2 Connectors
The CPCI-6115 CPU board implements a 64-bit CompactPCI interface on connectors J1 and
J2. J1 is a 110 pin AMP Z-pack 2mm hard metric type A connector with either +3.3 V or +5 V
signaling. J2 is a 110 pin AMP Z-pack 2mm hard metric type B connector. Each of these
connectors conform to the CompactPCI specification. The pinout for connectors J1 and J2 are
implemented as defined in the CompactPCI specification for a 64-bit peripheral slot board. Note
that no reserved or bussed reserved pins are used by CPCI-6115.
J2. J1 is a 110 pin AMP Z-pack 2mm hard metric type A connector with either +3.3 V or +5 V
signaling. J2 is a 110 pin AMP Z-pack 2mm hard metric type B connector. Each of these
connectors conform to the CompactPCI specification. The pinout for connectors J1 and J2 are
implemented as defined in the CompactPCI specification for a 64-bit peripheral slot board. Note
that no reserved or bussed reserved pins are used by CPCI-6115.
2
RTS
OUTPUT
3
GNDC
N/A
4
TXD
OUTPUT
5
RXD
INPUT
6
GNDC
N/A
7
CTS
INPUT
8
DTR
OUTPUT
Table 3-2 COM1 Pin Assignments, J19 (continued)
Pin #
Signal
Direction
Table 3-3 10/100/1000 Megabit/s Ethernet Connector, J95
Pin #
1000 Megabit/S
10/100 Megabit/S
1
MDIO0+
TD+
2
MDIO0-
TD-
3
MDIO1+
RD+
4
MDIO2+
Not Used
5
MDIO2-
Not Used
6
MDIO1-
RD-
7
MDIO3+
Not Used
MDIO3-
8
Not Used