Motorola CPCI-6115 用户手册
CPCI-6115 CompactPCI Single Board Computer Installation and Use (6806800A68D)
Functional Description
Interrupt Handling
86
3.
The interrupting device is addressed from the MC64360 Device Bus.
4.
The interrupting device is addressed from the MV64360 I
2
C Bus.
5.
The interrupting device is addressed from the MV64360 PCI Bus 1.0 through the 21555
PCI-to-PCI bridge.
PCI-to-PCI bridge.
6.
The DS1621 Digital Thermometer and Thermostat provides 9-bit temperature readings
which indicate the temperature of the device. The thermal alarm output, TOUT, is active
when the temperature of the device exceeds a user defined temperature TH.
which indicate the temperature of the device. The thermal alarm output, TOUT, is active
when the temperature of the device exceeds a user defined temperature TH.
4.4.2.2
Sources of Reset
The CPCI-6115 SBC provides reset control from a programmable logic device (PLD) to provide
maximum flexibility of the circuit design. A hard reset is defined as a reset of all onboard circuitry
including the PowerPC hard reset and reset of all onboard peripheral devices. A soft reset is
defined as a reset of the PowerPC. The CPCI-6115 has these listed sources of reset:
maximum flexibility of the circuit design. A hard reset is defined as a reset of all onboard circuitry
including the PowerPC hard reset and reset of all onboard peripheral devices. A soft reset is
defined as a reset of the PowerPC. The CPCI-6115 has these listed sources of reset:
z
Power-On/undervoltage reset
z
Front panel reset switch
z
CompactPCI RESET# signal
z
MV64360 Watchdog Timer
z
M48T37V Watchdog Timer
z
System Control Register bit
The Processor RiscWatch HRESET# signal can cause a CPU-only reset.
4.4.2.3
Machine Check
The processor MCP# signal is pulled high (inactive).
4.4.2.4
Soft Reset
The processor SRESET# signal is connected only to the RiscWatch header.
4.4.2.5
SMI
The processor SMI# is pulled high (inactive).
4.4.2.6
Other Software Considerations
The following issues also apply to this board.
The MV64360 supports a big endian CPU bus. The endianess of the local memory (DDR and
SRAM) is also big endian. Data transferred to/from the local memory is NEVER swapped. The
internal registers of the MV64360 are always programmed in Little Endian. On a CPU access
to the internal registers, data is byte swapped.
SRAM) is also big endian. Data transferred to/from the local memory is NEVER swapped. The
internal registers of the MV64360 are always programmed in Little Endian. On a CPU access
to the internal registers, data is byte swapped.
Data swapping on a CPU access to the PCI is controlled via PCISwap bits of each PCI Low
Address register. This configurable setting allows a CPU access to PCI agents with a different
endianess convention.
Address register. This configurable setting allows a CPU access to PCI agents with a different
endianess convention.