Motorola WS5100 用户手册
Overview
1-3
1.1.2.1 Start Up
1.1.2.2 Primary
1.1.2.3 Standby
1.1.2.4 Error Codes
1.1.3 10/100/1000 Port Status LED Codes
A WS5100 Series Switch has two LED indicators for its RJ-45 ports:
• Upper left (amber/green) for link rate
• Upper right (green) for link activity
The following table provides additional information about the status of the 10/100/1000 Port Status LEDs.
Event
Top LED
Bottom LED
Power off
Off
Off
Power On Self Test (POST) running
All colors in rotation
All colors in rotation
POST succeeded
Blue solid
Blue solid
Event
Top LED
Bottom LED
Active (Continually Adopting Access Ports)
Blue blinking
Blue solid
No License to Adopt
Amber blinking
Amber blinking
Event
Top LED
Bottom LED
Active (Failed Over and Adopting Ports)
Blue blinking
Blue blinking
Active (Not Failed Over)
Blue blinking
Amber solid
Event
Top LED
Bottom LED
POST failed (critical error)
Red blinking
Red blinking
Software initialization failed
Amber solid
Off
Country code not configured.
Note: During first time setup, the LEDs will remain
in this state until the country code is configured.
Note: During first time setup, the LEDs will remain
in this state until the country code is configured.
Amber solid
Amber blinking
No access ports have been adopted
Blue blinking
Amber blinking